การพัฒนาผลิตภัณฑ์วัสดุคอมโพสิตจากวัสดุเหลือทิ้งอุตสาหกรรมปาล์มน้ำมัน = Development of palm oil fiber for composite materials / Parawee Pumwongpitak [et al.]

โดย: Parawee Pumwongpitak
ผู้แต่งร่วม: Parawee Pumwongpitak | Siriporn Larpkiattaworn | Sureeporn Kumneadklang | Busarin Noikeaw | Saengdoen Daungdaw | Laksana Wangmooklang | ปารวีร์ ภูมิวงศ์พิทักษ์ | ศิริพร ลาภเกียรติถาวร | สุรีย์พร กำเนิดกลาง | บุศรินทร์ น้อยแก้ว | แสงเดือน ดวงดาว | ลักษณา หวังหมู่กลาง
BCG: สารสกัด TRM: พลังงานและสิ่งแวดล้อม ข้อมูลการพิมพ์: Pathumthani : Thailand Institute of Scientific and Technological Research, 2025 รายละเอียดตัวเล่ม: 66 p. : tables, ill. ; 30 cmชื่อเรื่องอื่นๆ: รหัสโครงการ : 6618203073หัวเรื่อง: อุตสาหกรรมปาล์มนํ้ามัน | วัสดุคอมโพสิต | ปาล์มน้ำมันสาระสังเขป: This research aims to develop the process and value-added products from oil palm waste materials in the oil palm industry, especially the biomass from oil palm trunks. This waste material is usually left in the palm plantation area after the oil palm trees decrease fruit production. However, these oil palm trunks can be modified and treated as raw materials in fiber cement products for the building industry. In this research, the oil palm trunks were treated using a chemical treatment process under various conditions on a pilot scale. The properties of the treated fibers, such as fiber length, width, and chemical composition, were determined. The results illustrated that a suitable condition of treated oil palm trunk fibers, which can be substituted for the natural fibers for composite materials, is using 5% sodium hydroxide solution at 150C for 2 hours. The obtained fibers showed the average length and diameter of the fibers are 879 and 29.2 microns, respectively. For chemical composition, the cellulose, hemicellose, and lignin content were 86.41%, 3.94%, and lignin 1.96%, respectively. Furthermore, the composite materials with oil palm trunk fibers were produced on a pilot scale using 20, 40, and 60% obtained fibers. As a result, the treated oil palm trunk fibers can replace the imported natural fibers. The 20% replacement fibers showed that a Modulus of Rupture (MOR) of 8.90 MPa was found. However, with the increase of the fiber replacement, the MOR decreased but increased the water absorption. However, the properties of the composites compared to the Thai industrial standard of fiber-cement sheets: flat sheets according to the MOR values, the composite with oil palm trunk fiber is considered a type 2 product.สาระสังเขป: งานวิจัยนี้มุ่งเน้นการพัฒนากระบวนการและผลิตภัณฑ์เพิ่มมูลค่าให้แก่วัสดุเหลือทิ้งจากอุตสาหกรรมปาล์มนํ้ามัน โดยเฉพาะชีวมวลลำต้นปาล์มน้ำมัน ซึ่งถูกปล่อยทิ้งไว้ในสวนปาล์มน้ำมันหลังจากที่ต้นปาล์มน้ำมันให้ผลผลิตลดลง โดยลำต้นปาล์มน้ำมันสามารถนำมาแปรรูปและปรับสภาพ เพื่อใช้เป็นส่วนผสมในวัสดุคอมโพสิตสำหรับอุตสาหกรรมก่อสร้าง โดยในงานวิจัยนี้ลำต้นปาล์มน้ำมันถูกนำมาปรับสภาพด้วยวิธีการทางเคมีที่สภาวะต่างๆ ในระดับนำร่อง แล้วศึกษาคุณสมบัติของเส้นใยที่ได้ เช่น ความยาวของเส้นใย ความกว้าง และองค์ประกอบทางเคมี ซึ่งสภาวะที่เหมาะสมในการ แปรรูปเส้นใยที่เพื่อนำมาใช้ทดแทนเส้นใยธรรมชาติในการผลิตวัสดุคอมโพสิตได้คือการใช้สารละลายโซเดียมไฮดรอกไซด์ความเข้มข้นร้อยละ 5 ที่อุณหภูมิ 150 องศาเซลเซียส นาน 2 ชั่วโมง โดยเส้นใยที่ได้มีความยาวเฉลี่ย 879 ไมครอน และขนาดเส้นผ่านศูนย์กลางของเส้นใยเฉลี่ย 29.2 ไมครอน ตามลำดับ ซึ่งองค์ประกอบทางเคมีประกอบด้วยเซลลูโลส เฮมิเซลลูโลส และลิกนินร้อยละ 86.14, 3.94 และ 1.96 ตามลำดับ จากนั้นได้นำเส้นใยที่ได้มาขึ้นรูปเป็นวัสดุคอมโพสิตเพื่อทดแทนเส้นใยธรรมชาติที่นำเข้าจากต่างประเทศในระดับนำร่อง โดยใช้อัตราส่วนร้อยละ 20, 40 และ 60 ซึ่งพบว่าสามารถทดแทนได้ ทั้งนี้วัสดุคอมโพสิตที่ใช้เส้นใยลำต้นปาล์มน้ำมันทดแทนร้อยละ 20 พบว่ามีค่าโมดูลัสแตกร้าว 8.90 เมกะพาสคัล อย่างไรก็ตาม เมื่อทดแทนเส้นใยจากลำต้นปาล์มน้ำมันเพิ่มมากขึ้นส่งผลให้ค่าโมดูลัสแตกร้าวลดลงแต่ค่าการดูดซึมน้ำเพิ่มมากขึ้น ทั้งนี้เมื่อเปรียบเทียบคุณสมบัติของวัสดุคอมโพสิตตามมาตรฐานอุตสาหกรรม แผ่นซีเมนต์เส้นใย : แผ่นเรียบ พบว่าวัสดุคอมโพสิตที่มีส่วนผสมของเส้นใยจากลำต้นปาล์มน้ำมันสามารถนำมาใช้ทดแทนได้ และจัดอยู่ในชนิดที่ 2 เมื่อแบ่งตามความต้านแรงดัดของแผ่นวัสดุคอมโพสิต
    Average rating: 0.0 (0 votes)
ไม่มีรายการทางกายภาพสำหรับระเบียนนี้

There are no comments on this title.

to post a comment.
    Thailand Institute of Scientific and Technological Research
    35 Mu 3 Technopolis, Tambon Khlong Ha, Amphoe Khlong Luang, Pathum Thani 12120
    ☎ 0 2577 9000, 0 2577 9300